Hayward Impeller For Super II, 1.5 HP Full Rate and 2.0 HP Up Rate- SPX3015C

$59.99

IN STOCK
FREE SHIPPING

Part # 5110-10K

By Hayward Pool Products

  5 Average  

Details

Top

Part # 5110-10K

Manufacturer Code SPX3015C

Dimensions 4.75" X 0.6"

Alternate Part #'s HAY1012072, SP3015C, SPX3015C, 35-150-3056, HAY-101-2072, HAYSPX3015C

Product Description

Impeller For Super II Pool Pump 1.5 HP Full Rate and 2.0 HP Up rate- SPX3015C

Top

?     Asked on 12/18/2021by Peter E Norris

I have a SP310X15AZ pump inground pool. Manufacturer is Hayward. I would like to change the impeller. What parts would you recommend?
 Reply

A  Answered on 12/21/2021 by InyoPools Product Specialist Craig C.

Hello Peter.  Impeller selection is a direct relationship to the pump motor's total horsepower (THP).  The THP rating for the Hayward Pool Pump model SP3010X15AZ is 1.5.  The impeller correct impeller would then be the model SPX3010C.  Impeller for Hayward Super II 1.5 THP - SPX3010C   It is recommended that when replacing the impeller that the motor shaft seal, seal plate gasket and diffuser o-ring be replaced concurrently.  The GOKIT2 contains the parts required to complete the process.  GOKIT2   If you wish to increase the size of the impeller, then a corresponding increase in motor THP would be advised.
 Reply

  • Commented on 12/21/2021 by Product Owner

    Great website from which I had reached the recommendations you suggested but needed some hand holding!
     Reply

    • Commented on 1/7/2022 by InyoPools Product Specialist Megan C.

      Thank you for replying back, I emailed you two quotes to review for options to consider for replacement parts. The model#SP3010X15AZ can use the Generic Super II Pump™ Style Drive Train UpGrade Kit 1.5 THP - PL2762 The items in the Drive Train Kit should be replaced every ten years or replace the whole pump as they have completed the estimated life span. 
       Reply


?     Asked on 12/1/2020by Rick

I need a new impeller + gaskets. What do you mean by up rate? . Now with a 2.2HP motor, which impeller would I use.

 Reply

A  Answered on 1/29/2021 by InyoPools Product Specialist Hector F.

Hi Rick, could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos or provide them using our live online chat feature. Once we get those photos we can make the proper recommendation for your seal kit and here is a guide that we put together called "How To Understand True Pump Horsepower - Up Rated vs Full Rated" that best explains the difference between the two. 
 Reply


?     Asked on 6/14/2019by Rakesh S

my diffuser, impeller and ring has gone bad and I need to replace it. my motor is Century HST150, housing is SP3020EEAZ. The part that is there right now is diffuser SP3000BN, impeller SP3010C and ring SP3005R. I found that SP3010C is for 1HP motor but mine is 1.5HP. Is that the reason that my diffuser got damaged? looks like the ring rubbed against the diffuser causing the damage. Did the guy I hired put the wrong parts? Whats the correct diffuser, impeller and ring part number for me?
 Reply

A  Answered on 6/15/2019 by InyoPools Product Specialist Lennox H.

Hi, Rakesh S. The parts diffuser SP3000BN, impeller SP3010C, and ring SP3005R are correct based on the HST150 motor. If the Impeller Ring was installed incorrectly, that can cause damage to the impeller.
 Reply

  • Commented on 6/15/2019 by Product Owner

    Can I use sp3015c instead of sp3019c with HST150 motor. It is full rated 1.5HP motor?
     Reply


?     Asked on 6/4/2019by Inyo Visitor

will the impeller # sp3010-c work on a century # st1152
 Reply

A  Answered on 6/7/2019 by InyoPools Product Specialist Lennox H.

Hi. Yes, the SPX3010C impeller can be used with the ST1152 motor. However, it will not allow it to maximize the motor's performance such as this SPX3015C
 Reply


?     Asked on 5/31/2019by Pedro

will this Impeller fit super II pump 2 hp model # C48M2N111A3
 Reply

A  Answered on 6/1/2019 by InyoPools Product Specialist Hector F.

Yes, this is the correct impeller for model Super II pumps manufactured 1989 and prior. The models manufactured 1990 and after use part number 5110-10L.
 Reply


?     Asked on 5/31/2019by Pedro

will this Impeller fit super II pump 2 hp model # C48M2N111A3
 Reply

A  Answered on 5/31/2019 by InyoPools Product Specialist Hector F.

This would be the impeller for models made in 1998 and prior but if made in 1990 or after you would actually need part number 5110-10L.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench

Pool pump was improperly fitted with the wrong size impeller

Written on 5/1/2018 by Guest

Contacted INYO Pools to verify the correct impeller for my pool pump and ordered the new one. Installed the new impeller on the pump.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)