Pentair Sta-Rite 5" Trap Replacement Kit for Dura-Glas, Max-E-Glas, JWPA Series Pool Pump - PKG115



Part # 5059J

By Pentair Pool Products

  5 Average  



Part # 5059J

Manufacturer Code PKG115

Alternate Part #'s 351021354, PKG115, 35-102-1354, PENPKG115, PKG 115

Product Description

Trap assembly for several Sta-Rite pool pumps.

Commonly Used On

  • Sta-Rite Dura-Glas
  • Sta-Rite Max-E-Glas
  • Sta-Rite JWPA

?     Asked on 7/22/2021by Rishar

Hello, I have attached a photo of my pump.I think that it is a Sta-Rite Max-E Glas & Dura-Glas Pumps. Is the Sta-Rite Pentair Trap Body, DuraGlas, 5" Trap #C153-53P1 the right replacement part for it? If yes, can you please tell me what is the inside diameter of the intake of the Trap Assembly - PKG115 // $125.99 Mine is 2 inches OD. Thank you and be well Richard


A  Answered on 7/22/2021 by InyoPools Product Specialist Craig C.

Hello Rishar.  The photo is a Sta-Rite Dura-Glas or Max-E-Glas Pool Pump.  The Body, Trap is Pentair part number C153-53P1.   The intake accommodates 1 1/2" male threads.  The OD of the intake is 2".   The Pentair Pool Products Trap Assembly part number PKG115 is currently not currently in stock or available through INYO Pools. The Body, Trap, Pump Cover, and Cover o-ring are available separately.    Sta-Rite Dura-Glas & Max-E-Glas Pump Body (c153-53p1) (c53-23p)    Pump Cover C3-139P1 (25304-000-020)   Trap Cover O-ring (O-218) (U9-229) - 435   Sta-Rite Dura-Glas and Max-E-Glas

?     Asked on 7/17/2020by Kenny

Trap cover o-ring included?

A  Answered on 7/17/2020 by InyoPools Product Specialist Hector F.

Unfortunately no it does not. The part number is 5056-15 that you can view by clicking here

?     Asked on 5/28/2018by Theresa

will this fit Part# 5059J, Manufacture Code PKG115, Alternate Part #'s 351021354, PKG 115

A  Answered on 5/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Theresa. This Trap Assembly which has an Inyo # of 5059J and an MFG # of PKG115 which can be used with the Sta-Rite JWPA Series and the Sta-Rite Dura-Glas and Max-E-Glas pumps.  

?     Asked on 6/30/2016by derek


A  Answered on 7/7/2016 by InyoPools Product Specialist Lennox H.

Hi Derek, We do not have the bolt spacing of this trap assembly if you can provide the pump model that you have we can confirm if this will fit it.


Est. Repair Time

Less than 1 hr

Tools Needed

Socket Set

1     0

Cracked Trap Assembly on filter pump

Written on 6/16/2018 by Guest

4 simple bolts hold trap assembly to pump motor. Only glitch was changing In-put from pool from 2" pipe size to new 1 1/2" size that was simple. ( New 1 1/2" size actually primes pump twice as fast as the old size did. Very simple changeover and new Trap assembly is actually cone shaped rather that flat bottom which i think will reduce likelihood of water collecting in bottom and cracking from frost. Thanks INYO Pools for quick delivery and upstart of pool!

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
4 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews