By Hayward Pool Products



Part # W3SP3007X10AZ

Warranty 1 Year

Alternate Part #'s HAY-10-1022, HAYW3SP3007X10AZ

Product Description

Inyo Recommended Pumps


  • Voltage = 115/230
  • Pipe Size = 1.5"


  • In-ground pools of all types and sizes (including in-floor cleaning systems, solar heating systems, water features)
  • In-ground spas or in-ground pool/spa combinations
  • Fountains

Hayward Super II Pump Features

  • Self-priming (suction lift up to 8' above water level)
  • Easy thread design makes strainer cover removal easy
  • Lexan® see-thru strainer cover lets you see when basket needs cleaning
  • 180 cubic inch basket has extra leaf-holding capacity. Load-extender ribbing ensures free flowing operation
  • All components molded of corrosion-proof PermaGlass XL™ for extra durability and long life
  • Heavy-duty, high performance motor for quieter, cooler operation
  • Service-ease design gives simple access to all internal parts
  • Includes Pump Lid removal tool

Hayward Super II Pump Warranty

1 Year Housing
1 Year Motor and Parts

Hayward Super II Performance Data

  Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)
Model No. Max Rated Model No. Full Rated 40 ft 50 ft 60 ft 70 ft 80 ft 90 ft
SP3005X7AZ   47 38 26 12 - -
SP3007X10AZ SP3007EECA 63 55 46 32 - -
SP3010X15AZ SP3010EEAZ 89 80 69 56 34 -
SP3015X20AZ SP3015EEAZ 112 102 90 75 56 -
SP3020X25AZ SP3020EEAZ 132 118 103 86 62 -
SP3025X30AZ SP3025EEAZ 157 146 133 118 102 80
  SP303063AZ 157 146 133 118 102 80


Motor Performance / Amp Draw - Standard Pump Vs. Energy Efficient

Model No.

Product Specifications

1 HP
Pool / Spa Type:
115/230 V
15.0/7.5 amp
Service Factor:
Total HP:
1.1 HP
Port Size:
1.5 in.
Pump Model:
Super II

?     Asked on 4/26/2015by ben

How many gpm

A  Answered on 4/27/2015 by InyoPools Product Specialist Robert M.

The GPM depends on the feet of head. At 40' of head the pump would push 78 gpm.

?     Asked on 2/27/2016by Vince Herrera

What size is the threaded port for the inlet and outlet on a Hayward Super Pump P/N SP3007X10AZ ?

A  Answered on 2/29/2016 by InyoPools Product Specialist Hector F.

The ports on this pump are 1.5 inches.

?     Asked on 5/27/2016by Cyril Azoulay

What is the wattage at 230V for this pump? I need to replace my old 1HP pump and I'm debating between this one and the Raypak PS165VSP as they are at the same price after rebate from SRP. Any opinion?

A  Answered on 5/27/2016 by InyoPools Product Specialist Patrick P.

Hi Cyril this pump consumes about 1.72 Killowatts per hour (kWh) the Raypak Variable Speed Pump averages about 1kWh. You will normally run your pump 8 hours so the Super II will use 13.76 kWh per day vs. the Raypak Variable Speed using 8 kWh per day. If you live in California energy costs are roughly .17 cents per kWh so the Super II will cost you $2.34 per day to run or $70.17 per month to operate. The Raypak Variable Speed will cost $1.36 per day to operate or $40.80 per month to run. The Raypak VSP Pump would pay itself back in about 6 weeks which seems like it would be the way to go.

?     Asked on 9/19/2016by Taylor

Would this be sufficient enough for a 10k gallon pool with a caretaker pop up head cleaning system?

A  Answered on 9/30/2016 by InyoPools Product Specialist Alan M.

To answer your question, you will need to determine the minimum gallons per minute (GPM) that is required to operate your caretaker pop up system. You will also need to know the feet of head (How Do I Calculate Feet of Head for My Pool?). Based on the motor model SP3007X10AZ you can reference the chart on the product page Hayward Super 2 Pump 1 HP Single Speed - SP3007X10AZ, you can determine the pumps output of GPM to see if it will be enough to operate the caretaker system.

?     Asked on 11/15/2017by Gary

Hayward super pump II, Is there a difference in the seal plate with part number SPX 3020E and SP 3020E? what does the X stand for. My pump does not have the X in any part number. Thanks for your help. Gary

A  Answered on 11/15/2017 by InyoPools Product Specialist Kevin G.

Hello Gary,This is a common misunderstanding. These two parts you mentioned are the same. The x denotes that it is a replacement part, hence why your original part does not have the x.


Review Summary

 (Average 4.7  out of 5 stars)
10 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews