Part # 5056-09A
Manufacturer Code C105-92PS
Dimensions 4.75" X 0.3"
Alternate Part #'s 351021035, 40507, 788379734725, C10592PS, STA-101-3711, STA1013711, 35-102-1035, PENC105-92PS, PENC10592PS
Impeller for Sta-Rite Dura-Gla and Max-E-Glas pool pump. For 1/2HP Full Rated Motors or 3/4HP Uprated Motors.
Frequently Bought with this Impeller
Shaft Seal for Seal Plate with Copper Cone 5250-100
Shaft Seal for Seal Plate without Copper Cone 5250-104
Diffuser 5056-10A
I have a C105-92P impeller, would this replace it, pentair can't find my part # or answer my question
Reply
Hi, Rick. This Impeller - C105-92PS can be used if you're using an SQ1052 or USQ1072 motor on a Sta-Rite Dura-Glas or Max-E-Glas Pump.
Reply
Is it possible for you to xref the specs on a c105-92p impeller, the pump this is from has no model or name stamped on it and it is old, would be a shame.to replace the pump and motor just because I cant find an impeller to match the old.one
Reply
This part number usually references the Sta-Rite Duraglass and Max E Glass pump series however if after viewing that diagram and it does not look like your pump you can always email us images of that pump to upload@inyopools.com so we can confirm the model of the pump for you.
Reply
Will this fit a USQ-1102 motor? I'm a returning customer.
Will it fit? Yes, but, unless the motor on your pump is different than the factory recommended and used, it is not the proper size (horsepower) for the existing motor on your Sta-Rite Pump and will result in lower flow and/or pressure. Your USQ1202 motor is a 1 HP Uprate motor, so the most appropriate impeller for it is this Impeller - C105-138PEB. If you do want the smaller impeller we would recommend getting the Century 3/4 HP Square Flange 48Y Up Rate Motor - USQ1072 so they match and so you get the optimal efficiency.
Reply
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set, Adjustable Wrench
Followed steps in videos on inyopools super easy. Disconnected motor , separated housing. Removed diffuser , then secured motor shaft and impeller came right off. New one went on great and then I reversed installed all parts until Job complete
-C105-92PS.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-C105-92PS-8947eda5-f55f-434b-8796-c0a3c6b8fcd6.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-C105-92PS.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Dura-Glas Impeller For .75 Up rate (.5 Full Rate)- C105-92PS")
-C105-92PS-8947eda5-f55f-434b-8796-c0a3c6b8fcd6.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Dura-Glas Impeller For .75 Up rate (.5 Full Rate)- C105-92PS")
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Old one was worn out . New one easy to install just watch videos and follow instructions
Was this review helpful to you?