Part # PL2854
Warranty 2 Year
Alternate Part #'s 193986XCN, B2854, B854
PureLine 1.5 HP Replacement Pool Motor for Pentair® & Jandy® brand pool pumps
Is your pool pump motor running loud, leaking or humming? These are all signs that it’s time to be replaced. The PL2853 PureLine Replacement motor is designed as a drop-in replacement motor for some of the most popular 1.5 HP pool pumps like the Pentair® Whisperflo, Pentair® Challenger, Pentair® Super Flo, Jandy® Stealth and many more.
The PureLine replacement motor is made of the highest quality components like sealed ball bearings which means it is an ultra quiet motor. Because of its high-quality construction the PureLine replacement motor is backed by a full 2-year warranty.
When it comes to replacing your motor Inyo has you covered we have created a ton of resources to make this project a snap, like our Video on How to Replace a Pool Motor this video walks you through all the steps to replace your motor. Most of our customers decide to tackle this project on their own and by following our video they complete this project in about an hour.
When replacing your motor we highly recommend a tune up kit which includes all the seals and gaskets for your pump. Many times when you use your old seals you may have leaking and seal leakage is one item which will void the motors warranty so make sure to protect your investment with a tune up kit. Below we have listed the tune up kits for some of the most popular pool pumps.
Don't Forget Your Tune Up Kit
Note: NOT California Title 20 Compliant.
California Title 20 Compliant Options:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
I purchased this motor and no paper work came with it. In particular, is there warranty information? Do I need to register the pump with the manufacturer?
Hi, Greg. No paperwork is required to be completed. Contact Inyo Pools if there is an issue with the motor for warranty purposes.
Change motor only d83hf pump
Please view our How to Read a Motor Label Guide https://www.youtube.com/watch?v=aN6CS3HBLmw&t=34s to determine the correct motor. If you need further assistance you may contact us at 407.834.2200 or use our service link at https://secure.inyopools.com/Support/SupportRequest.aspx to upload images of the label.
Less than 1 hr
4 to 8 hrs
Screwdriver, Pliers, Wrench Set, Adjustable Wrench
Watch a ton of videos. Ponding in spring gasket part fell off and didn’t find it until the motor was installed and leaking. Also dropped brass screw while mating electrical connections and fell inside the pump. Had to take it all apart again.
2 to 4 hrs
Screwdriver, Pliers, Socket Set, Adjustable Wrench
after very attentive consult online with people at INYO, I ordered the correct motor. I used the online DIY photos to remove the motor, remove the parts that belonged on the existing pump and switched motors. Very smooth with the help of INYO.