Part # SP1593
|Why purchase a Hayward Matrix Pump from Inyo?|
We have the Largest Selection of Hayward Pumps on the Internet!
Lowest Prices Guaranteed!
No need to wonder if you are getting the best price on a Hayward Pool Pump! Find a competitor with a lower shipped price on the same product and we'll beat the price! Simply contact us with the competitor's website and product information and we'll BEAT their price! If we are unable to beat the competition's price, we will send you a reward code for $10 off your next purchase of $50 or more.
Power-Flo Matrix Above-Ground Pump Series
The Big news in above-ground pumps is the PowerFlo Matrix by Hayward. It features an industrial-size strainer basket to collect a lot of debris without a lot of maintenance.
The high-quality Noryl impeller offers wide openings to prevent leaf and debris clog. While this pump is impressively equipped, the PowerFlo Matrix is also very efficient. It has a heat-resistant, double-size seal and a protected rear-mounted switch for high-energy efficiency. Plus, its heavy-duty, high-performance motor provides years of trouble-free operation thanks to an integrated automatic thermal overload protector. PowerFlow Matrix clearly the superior choice in above-ground-pool pumps.
The Power-Flo Matrix has been engineered as a uniquely superior above-ground pool pump. With a single push of a button, this truly versatile pump changes from a veritical to a horizontal discharge and back again. Its large profile and integrated styling makes the Power-Flo Matrix a swimming pool pump like no other.
Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)
|Model #||10 Ft.||20 Ft.||30 Ft.||40 Ft.||50 Ft.|
Applications & Pump Features
• Above-ground/on-ground pools
• On/Off Switch
• The above-ground industry's largest strainer basket for large debris collection with minimal maintenance
• Horizontal/vertical discharge feature -- simply converts from vertical to horizontal discharge orientation with the press of a button
• Quick disconnect intake and discharge pipe connection
• C-Clip Connector allows for easy disengagement of strainer housing in a matter of seconds for hassle-free maintenance
• Heavy-duty, high performance motor with integrated automatic thermal overload protector for years of operation
I have a Hayward pump Modle#SP1593 1.5HP 115 volts 15.0 Amps My plug is no good and I need to order a new one. It is shorting out my outlet. He promgs in the plug are burnt. Do you have a replacement plug I can purchase
I have a Hayward power flo matrix 1.5hp 115 volts 15 amp. It is currently not working. What is the best replacement for this that is inexpensive? Thanks
Hi, Joanne. You can use the Pureline Pure Pro XL - PL1502 as a replacement.
The pump is missing from a pool I was given I have a Intex 22x52 above ground, sand filter with Praher multiport tm-12-L and Intex saltwater system. What pump should I get to fit hoses and size of pool. TY
Hi, Loedi. We will need to know the make and model of the sand filter tank in order to size a pump for your pool.
Hi, The switch on my programmable pump has broken. I am unsure as to how I can get a replacement. Any ideas? Thanks
Hello Tom- If you need just the switch you would need the On Off Motor Switch (spx1500s8). The whole back portion of the motor that includes the timer is Hayward Above Ground Pool Pump Timer Microprocessor - SP1500FT but is no longer available.
I have a 35,000 gallon, inground pool. Salt water system. I need a new pump. Will this pump handle it? Does the pump have a saltwater seal?
Hi, Jeff. This pump will not be able to handle an inground pool application. This is an above ground pool pump. This pump does not have a saltwater seal, however, it can be used with a saltwater pool.
is this pool pump (Haywood Matrix pool pump) convertible to 230 volts?
Hi. This pump cannot be converted to 230 volts.
what is the GPM for a Hayward Matrix power flo sp15931fp pump
Hi. The flow rate will vary depending on the feet of head. We have a performance data available in the product details.
What is the operating cost per day for the Hayward 1593 PowerFlo Matrix Pump....we have been advised to run our pool pump 24/7 and I would like to get an idea how much it will add to our electric bill.....our kwh cost is .14.
Hi, Mary. This pump will cost $5.80 per day to operate based on your energy rate.
Our Hayward Swimpro Voyager pump went out and I need to know what I should replace it with since they don't make this pump anymore. We have a 32" circular, 22,000 gallon above ground pool with a larger vertical filter and heater. The pump is located approximately 10- 15 ft from the pool. Thank you!
Hi Susan, This Hayward 1.5 HP Matrix Pump would be the pump we would suggest as a replacement for the Hayward Voyager system on a pool of your size.
i need a diagram to show me how to hook up my cord to the pump
Hi, Lana. There is a wiring diagram located on the motor. The BLACK wire will go to the LINE terminal, the WHITE wire will go to the NEUTRAL terminal and the GREEN wire to the GREEN screw.
How you determine horsepower for pump? My pool has 20,000 gal.
Hi, Rolando. The pump size would be based on the size of the pool, location of the pump, filter size and whether you have any additional features. For a 20,000 gallon above ground pool with a large enough filter can use a 1.5 HP pump.
My SP1593FP pump motor went out, and i found an SP1580X15 pump locally. From what I found online the output is very close to each other. But when I hooked up the 1580X15 to the 27 ft diameter above ground pool, the flow is hardly enough to even hold the vacuum adapter and dos win place when I vacuum the pool.
Hi Tom, You might need to check and or clean out the filter to see if that is causing the low suction problem.
how long is the warranty on hayward matrix above ground pool pumps
The manufacturer's warranty is one year.
I need to replace the pump for my Hayward PowerFlo Matrix (model #SP15931CNP and Serial # 21121302005265001) what are compatible motors? I already bought one that the installer said was the wrong one.
Wendy, You can view replacement motors for the Matrix pump here: http://www.inyopools.com/pool_parts_hayward_matrix_pump.aspx
My 1.5 HP Hayward SP1515Z2es is squealing and I suspect the front motor bearing? What is the current Hayward replacement model for this particular motor/pump? What is the part # for the front bearings of my current motor and the four very long motor screws that hold the pump in place? I plan to replace my motor/pump but would like to attempt to repair my old for backup purposes. Thanks
Hi Bob, The Hayward Matrix Pump 1.5 HP Dual Speed-SP15932S is the correct replacement pump. We're unable to get the bearings and thru bolt for the SPX1515Z2ES motor, you can try contacting Hayward at 908.355.7995.
Is the Hayward Perflex Series Extended Cycle Basic Filter Unit models EC65A and EC75A compatible with the Hayward Matrix Swimming Pool Pump 1.5 HP (SP1593)?
Hi Russ, You can use the Hayward Matrix pump with EC75A filter if you have an above ground pool. The Matrix pump can not be used on an in-ground pool.
Will this pump work with an In-ground pool ? or is it strictly for above ground pools? I have an in-ground and the pump only has to lift the water 8 to 10 inchs. will this pump work for me ?
Hi Bernard, This pump can not be used with an in-ground pool, only above ground pools.
How many AMPS does #SP1593 draw and the SP1592?
The 1-1/2 HP Matrix Pump SP1593 draws 16 amps at 115V and the 1 HP Matrix Pump SP1592 draws 12 amps at 115V.
I need to order the strainer cover for a Hayward pump model # sp1593, power flo matrix, 1 1/2 hp. I do not need the whole pump but cannot find just parts on your website.
I had the basket off to look at the impeller it didnt spin real free. This pump run really good for about month. It is 2 year old now it has weak pressure. I back wash many times. The sand is 2 years old. What do you think
Mark - You might have to take the motor out of the pump housing to see why the impeller is not spinning freely. It may be cracked or loose or debris might be clogging it. Also check the diffuser. When you have the motor out and the impeller still doesn't spin freely, your motor bearings may be bad. See our guide on "How To Replace A Pool Pump Impeller" for information on pulling out the motor. You will not have to replace the impeller just ot look at it.
I need an o-ring for the pot (strainer) of this pump. About 7" OD. All the O-Rings I've found are about 5 1/2" OD. Can you help me find one?
Ed, Yes. We carry the Hayward Matrix strainer cover o-ring.
Is there a cheaper replacement pump an motor than the power flo matrix that hooks up the dame
Hello I asked this question about the impeller for the hayward pool pump but the answer you gave me back was for an 3/4 and 1 horse pumps, I have a 1.5 pump. I need the impeller and all the gaskets, seals, grease to install it. Again what is says on my pump is hayward matrix power flow 1.5 Sp 1593 what else might you need. Is there a kit that has all involved or just separate
Hi Bo sorry for any confusion, it looks like Hayward uses the same impeller for both there 1 HP, 1-1/2 HP and 2 HP Matrix pumps, which is this Matrix Impeller. The seals and gaskets are sold individually and not as a kit and all of those items were listed in the last reply with links to each product, those items will be all that you need.
Have this pump for my pool above ground. Looking for parts need the impeller and of course seals, gaskets etc. can't seem to locate it and when I did it the cost was insane.You have this part
Hi Bo. The part number for the 3/4 HP impeller is (5111-07D) it's listed at 32.99. The part number for the 1 HP impeller is (5111-07F) it's listed at 33.99. The seals and gaskets are sold individually. Strainer Cover O-ring 5111-84. $16.99. Diffuser O-ring (5111-77) 15.99. O-ring Housing (5111-80) 25.99. HAYWARD SHAFT SEAL (OEM) (SP1500KA) 28.99
Do I need to buy other parts or is it a complete pump?
Hello Ben - The Hayward Matrix model SP1593 is a complete pump. No other parts are required for the pump to operate.
What is the voltage on this unit? How long is the manufactures warranty? If the system requires repairs during warranty, what do I do?
This pump runs on 115V power. This unit comes with a 1 year manufacturer's warranty. If the pump needed repair, you would call Hayward directly and they would put you in touch with a warranty service station in your area.
Less than 1 hr
Screwdriver, Adjustable Wrench
I determined that the problem was the motor on my Hayward above ground 1-1/2 hp pump. I purchased the entire pump and motor from Inyo Pools because it was more reasonable to buy the entire unit and get a new pump at the same time. The pump came with the discharge facing upward, I followed the easy step by step instructions and in less than 10 mins I had a side discharge pump. Installing the new pump to filter was easy; two bolts to the plastic base of the filter and a hand tightening connection to the filter itself.
(4 out of 5 stars) Hayward 1.5 HP pump
Reviewed By: T-Bone from Bluffton, IN ()
Pros: Excellent pump, love the new clean out basket design
The updated design from our last hayward was excellent. The new basket clean out is awesome and screwing the lid on is much be easier and attaches easier than the previous model.