$138.99

Qty:

By Custom Molded Products


Details

Top

Part # PL0714

Dimensions 14" x 7-7/8"

Alternate Part #'s 26-253-1025, 27515-154-000, 5535100 SEA, HAY06221, PCPTM-12-H8, PRTM12H8, SP071113, SP0714T, SP704, SP714T, SW711T, TM-12-H8, _27515-154-000, 27515154000, CMP27515154000

Product Description

The PL0714 Valve is an After-Market Replacement Valve for the Hayward SP0714T Valve which is Commonly Used on Hayward Pro Series Sand Filters. This is not the original valve by Hayward but is an After-Market valve that fits the Hayward sand filters.

 

Is your backwash valve leaking?

Why spend 30% for the Hayward original when you can get an after-market valve at the same quality!

This is an after-market replacement top mount backwash valve which is a direct replacement for the Hayward SP0714T & SP711-13 valves as well as the Jacuzzi DVK7 valve.

The Hayward SP0714T & SP711-13 valves are commonly used on the following Hayward Pro Series Sand Filters: S166T, S180T, S210T, S220T, S244T & S270T. 

The Jacuzzi DVK7 valve is commonly used on the following Jacuzzi Laser Sand Filters: 160L, 190L, 225L, 250L please note that the Jacuzzi Laser had two style valves a bolt on style and a clamp on style this is the clamp on style. The bolt on style valve is far more common and can be found here Jacuzzi Laser bolt on style valve

Product Specifications

Plumbing Size:
1 - 1/2 in.
Model:
Hayward Pro Series Top Mount Sand Filters
Valve Type:
Multiport
Valve Location:
Top Mount
Top

?     Asked on 6/28/2009by Guest

My Sand Filter is a Hayward S160T is the is the proper replacement valve the S160T filter?
 Reply

A  Answered on 6/28/2009 by InyoPools Product Specialist Patrick P.

No this is not the proper filter valve for the S160T. You may view the proper valves here >http://www.inyopools.com/pool_parts_hayward_s_160t_filter.aspx The 4707-0 is the Hayward Original valve and the 4707P is the generic replacement which will work as well.
 Reply


?     Asked on 1/23/2012by Guest

How do I bleed air for a top mounted Hayward multiport valve? They have no air bleeder valve.
 Reply

A  Answered on 1/23/2012 by InyoPools Product Specialist Patrick P.

Hayward TOP mounted multiport valves do not require an air bleeder valve. They self purge air in the system through the return lines.
 Reply


?     Asked on 7/15/2012by Guest

I have a Hayward S-180T model sand filter and my owner's manual states that a SP-711-13 is the proper vari-flo control valve. I do not see this item listed anymore. What do I replace it with?
 Reply

A  Answered on 7/15/2012 by InyoPools Product Specialist Patrick P.

The SP711-13 which was used on the Hayward S180T has been replaced by the SP0714T listed here on this page.
 Reply


?     Asked on 8/1/2012by Guest

Is the SP714T the same as the SP0714T?
 Reply

A  Answered on 8/1/2012 by InyoPools Product Specialist Patrick P.

The SP714T and the SP0714T are the same exact valve.
 Reply


?     Asked on 8/1/2012by Guest

Is the SP714T the same as the SP0714T?
 Reply

A  Answered on 8/1/2012 by InyoPools Product Specialist Patrick P.

The SP714T and the SP0714T are the same exact valve.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

1     0

gasket failed

Written on 9/23/2019 by Guest

Works so easy to back flush.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

2     0

Broken piece in mount valve

Written on 8/22/2019 by Guest

Tried to find brand and number on valve, but too old. Tried several companies without success. Friend recommended DIY. Called and described filter, was told
what part and was set out fast. Love doing business with them.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

3     1

Water was leaking from the Backwash Port.

Written on 7/22/2019 by Guest

Looked at repairing the valve, but INYO had a replacement valve for nearly the same cost as the repair item. Easily decided to replace the valve. Valve was delivered in timely manner, came as advertised and fit without a problem. Simple and quick replacement.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

2     0

No mounting clamp or pressure gauge

Written on 7/16/2019 by Guest

I received my Top Mount Valve but before I placed the order I ask the representative if the Top Mount Valve came with the mounting clamp and she assured me that it did, so I ordered it. Come to find out, when I opened the box no clamp or pressure gauge so gave a phone call and they took care of the missing parts.

Once I received all the parts I released the pressure from sand filter unplugged all power and dismounted the Top Mount Valve unscrewed the fittings from old valve (since they were in great condition) and screwed them on to the new valve but add some Teflon tape to all 3 parts for better tightening (just hand tight )

I then wrapped the pressure gauge with Teflon tape and also hand tighten, connected all hoses to the proper outlets and turned on the power and Wala pool is up and going thanks Inyopools for coming through for me. I’d recommend your service to anyone who may want or asked for great replacement parts; Francisco Martinez 👍

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

1     0

Bypass valve leaking

Written on 7/8/2019 by Guest

Turn off pool pump. Turn valve handle to close. Disconnect hoses to and from valve and place inside pool so not to lose water. Remove valve collar and pull out leaky valve. Replace with new valve and tighten collar braces. Reconnect hoses and turn on pump.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Appatently the lever was stripped

Written on 7/2/2019 by Guest

Only had to remove a few screws, reset with the piping and it was completed.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Adjustable Wrench, Pipe wrench (for PVC connectors)

2     0

Old valve on my Hayward Sand filter

Written on 7/1/2019 by Guest

Very easy to install. The information included walked me thru it step-by-step beginning with removal of the old valve, the PVC pipes for incoming and outgoing water.

Also ordered a new flange and o-ring so all were new. Installed as per the instructions and diagram, added teflon tape to all the threads (as explained in the instructions) and reinstalled the flange and tightened all screws (hand-tightened).

Ran a test on the filter and had to make some small adjustments to tighten the pipes and it works great, just like new, now.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Wrench Set

1     0

Air bubbles from the jets

Written on 6/25/2019 by Guest

Recently had a lot of air bubbles coming from my jets. Found a crack and bad O-ring on my multiport valve. Found a replacement from pureline at a great price that was compatible with my Hayward filter. Perfect fit and great product! Inyo sells great product!

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Leaking Out the Top

Written on 4/20/2019 by Guest

Tighten the screws around the top.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Wrench Set, pipe wrench

1     0

Sand Filter Valve Leaking Through

Written on 3/31/2019 by Guest

I ordered a new one from Inyo Pools and got it in a few days. With a screwdriver and a pair of pliers, I went to work on the old one. Loosen the clamp that held it in place, took unions loose on piping and pulled in out of sand filter with pipe wrench and removed fittings off the old head. Put fittings on new valve head, put back in sand filter, connected to the unions and put filter back in service. That's it.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

6     0

Our top mount valve had a crack in it we had a Hayward Vari-Flo XL and replaced it with this one

Written on 5/16/2018 by Guest

We removed the screws on both sides on the bottom we pulled up on it and the white Pole needs to stay in Sand filter so be careful not to pull it up with top valve we put the new one on making sure the white Pole goes inside the open hole on new valve and the hose holes are lined up where they need to be. This part has been compatible just like the customer service stated it would be. Works great no problems.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.66  out of 5 stars)
82 Rating
5 star:
 
(67)
4 star:
 
(8)
3 star:
 
(4)
2 star:
 
(0)
1 star:
 
(3)

The Most Helpful Review


The Most Recent Reviews