I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
Reply
Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Why doesn't this kit come with bearings?
Reply
Alex, The GOKIT32 is specifically made for the "wet-end" of the pump not the motor. The bearings are specific to the motor not just the pump model. We can try to match the bearing based on the model number or the size of the bearings.
Reply
I have an older Wisperflo Pool Pump and need to replace the motor and all gaskets.
Do you have a GOKIT32-SALT gasket set for salt water pools?
Reply
Hi, Click the link >Pentair/Purex Whisperflo Tune Up Kit (GOKIT32SALT)<, it will direct you to the kit for salt water pools.
Reply
Will the tune up kit for the whisper flow fit a super flow?
Reply
Those seals and gaskets are different from each other.
Reply
I have a Pentair WF-26 , 011773 pump. The intake valve was left closed from a cleaning and the pump ran 8 hours dry. The pump works but seems like it is making a lot more noise. Is it likely that the pump was damaged and if so, any recommendations on parts that would be needed to rebuild the pump? I did not find a new pump without the motor as a part on the web site. Is that available and if so, how much?
Thanks
Reply
Hi Steve, many times when this happens the motor can get extremely hot actually warping the pump housing and damaging the motor. My suggestion would be a complete new Pentair Whisperflo WF-26 011773 Pump. You could keep your old pump for spare parts if you ever needed them.
Reply
I think I found the right replacement motor for the Pentair Super Flo High Performance Pump (Motor # 196237) Part # 340037 Model SF N1-3/4A
It's the Century B2847. 56Y. What tune up kit do I use since you don't list Super Flo only Whisper Flo ? Please let me know if I have the right Motor, Also is there an EE model for better efficiency.
Reply
The energy efficient replacement is part number B661 and the seals that I'll need are part numbers 5003-04 and 5250-104. If you need any other parts here's a link to the parts diagram.
Reply
Will the GOKIT 32 fit the WFE-30?
Reply
Hi Barb, Yes, GOKIT32 is the correct kit for the WFE-30 pump.
Reply
I have a Whisper Flow unit. The place where you add water before turning on the pump. The part 357150 has two ridges broken so I cannot tighten the lid. Every thing works but this tightening device. Can I purchase such part to align and secure the lid.
Thank you
jim14mayfield@gmail.com pump
Reply
Hello Jim, Yes the Lock Ring - Black (whisperflo) (357150) is available for purchase and you can click on the link to take you to the product page.
Reply
I have a whisper flow pump, Can i just change the motor to a variable speed to make it more efficient or do i have to change the whole pump ?
Reply
Hi Rob, Yes, you can convert your Whisperflo Pump to a variable speed pump using the Century V-Green Motor.
Reply
I have a Whisperflo WF-24 pump with an AO Smith B2853 motor. Is the GO KIT 32 the correct kit to replace the seals?
Thanks in advance,
Alan
Reply
The GOKIT32 is the correct Tune-up Kit for the WhisperFlo WF-24. Reminder that if you have a salt water chlorination system, yoou will want the GOKIT32SALT Tune-up kit.
Reply
I have a WFE-4 WhisperFlo. Is this the proper seal/tune-up kit?
Reply
Hi, Robert. Yes, this is the correct tune up kit for the WhisperFlo WFE-4 pump.
Reply
I have a Pentair Variable Speed 230VAC pump, does this KIT suitable for this model?
Reply
Yes this kit will work for the Intelliflo and Whisperflo series pumps.
Reply
what motor to order ?
No label on pump
However Pentair 7-177449-03 is the motor #
Robert
Reply
I ordered 3/4 hp square flange motor. Is this the kit for the motor shaft and pump impeller?
Reply
Hello Waylon- The seals are based off of the pump not the motor. We would need to know what the model of your pump is to find the right seals for you.
Reply
My pool was built in 2002 still have the same pump. Recently I had the motor replaced on the pump Pentair Challenger High Performance pump and it has started to leak. The motor is a Century cat#B2854 pt#0-F56AA40A01-24. What tune up kit do I need to order? Thanks in advance Juan T
Reply
Hello Juan- The tune up kit you will need for your Pentair Challenger is the Tune Up Kit Pentair Challenger Pump - GOKIT5
Reply
Will this kit work on WF-28c?
Reply
Hello, This GOKIT32 will work on a WF-28 Pentair / Purex Whisperflo.
Reply
I have an Intelliflo 4 160 Pentair P/N 011013 manufactured in 2008. Is this the correct tune-up kit?
Reply
Hi, Rich. The Whisperflo Tune Up Kit - GOKIT32 is compatible with the Intelliflo 011013 pump.
Reply
What's the difference between the GOKIT32 and the GOKIT5? I am purchasing a Pentair Challenger 1.5HP Full Rated (B2842) Motor and want the correct seal kit.
Reply
Hi, David. The GOKIT32 is for a Whisperflo Pump and GOKIT5 is for a Challenger Pump (High Pressure). The B2842 is the motor number which can be used on several different pumps. If you can provide us with the model number of the Challenger pump that you have we can confirm if GOKIT5 is the correct kit.
Reply
I have a pentair intelliflo pump WF/NT - 4 - 160 P/N 011013. I need a new impeller as the short 2 1/4" moulding that sticks out from the pump sheared off (side where the screw goes in) Will i also need a housing.
Reply
The impeller is listed as key 17 on this Intelliflo parts diagram. We do recommend replacing any apparent pump parts that are worn or damaged but if would like us to be sure then please send a few images of the pump and its damaged or worn parts to upload@inyopools.com.
Reply
What kit should I use with a WF-3 Part no. 011579 Whisperflo
Reply
John, The GOKIT32 would be the correct tune up kit for the Whisperflo pump.
Reply
whats the difference between go kit 32 and go kit 30 and which one fits a purex WFE-8
Reply
I have a WhisperFlo WF-26 pump with a motor B849. Will this kit work?
Reply
whisper flow motor replaced by century motor cat #B855 which seal kt do I use?
Reply
Hi. This Whisperflo Tune Up Kit - GOKIT32 or GOKIT32SALT is the correct kit you'll need.
Reply
Will this fit the 1/2 HP Standard Motor - Full Rate (B846, B2846)?
Thanks
Reply
The seal kit will depend on the model number or name of the front pump housing that the motors bolt to. If you click here then you can view a pump that uses this seal kit. If you are not sure of your model then you can always email images of it to upload@inyopools.com so we can assist.
Reply
Will this seal kit work on a Pentair WF-26 and a Wf-24.?
Reply
Hi, Leo. Yes, this Whisperflo Tune Up Kit will fit both the Pentair WF-26 and WF-24 model pumps.
Reply
WF-24 GOKIT32 question - are these seals and parts Pentair manufactured or sourced?
Thanks.
Reply
Hi, George. The parts that makes up this kit are all aftermarket parts. They're not OEM.
Reply
Will this work for my Pentair 011018 IntelliFlo Variable Speed High Performance Pool Pump, 3 Horsepower? Built in April 2014
Reply
Yes, this seal kit will work on your model Intelliflo.
Reply
How do I get a performance curve for a Whisperflo WF-26 using this Motor?
Reply
Hi. You can use this Whisperflo Performance Curve to gather the flow rate if you know the Total Dynamic Head (TDH) of your pool.
Reply
That curve is for only one speed. I need a curve showing multiple speeds.
Reply
Hi, Michael. The Whisperflo Performance Curve is also used for the single and dual speed Whisperflo Pumps.
Reply
is this the right kit for motor b2853?
Reply
Hello, What is the brand and the model of the entire pump? If you are unsure, you can send us a side photo of the entire pump and we can identify it for you.
Reply
Hi, I have a pentair wf 28 2hp 115/230v ,need to replace motor,
what motor do I need and what gasket kit do i need?
Thank you
Reply
Hi. You will need the PL2859 and this Whisperflo Tune Up Kit - GOKIT32 or GOKIT32SALT.
Reply
Hi, I have a pentair wf 28 2hp 115/230v ,need to replace motor,
what motor do I need and what gasket kit do i need?
Thank you
Reply
Hi. You will need the PL2859 and this Whisperflo Tune Up Kit - GOKIT32 or GOKIT32SALT.
Reply
Will the GOKIT32 work for my Pentair 011017 IntelliFlo VS+ SVRS Pool Pump, 3 Horsepower?
Reply
Yes, you can use this seal kit with the Intelliflo pump.
Reply
will this kit work on a model HSQ165 motor
Reply
Do you have information on the front half of your pump? The best place to find your pump model information is on the pump housing tag. Pool pump manufacturers label each housing with make and model information as well as serial numbers. The pump model number is the golden ticket to finding the proper tune up kit, so we will want to find that most of all. The tag is usually placed on the side of the strainer basket or near the discharge port for easy access. Model number formats vary depending on the manufacturer but should be marked clearly.
Reply
Hi, I ordered a Century B2854 motor and a Hayward pump SP 2810x15. What is the correct GoKit, ?
Thanks,
Siggi
Reply
does this kit work with pentair vs 3050
Reply
Hi, James. Yes, this tune up kit will work.
Reply
Would this kit fix the PurexTriton WhisperFlo High, Performance Pump (Model: WFE-4)?
Reply
Hi, Sophia. Yes, this Tune Up Kit Pentair/Purex Whisperflo will work with your model pump.
Reply
will this work for wfe-6 1.5 hp
Reply
Hi, Robert. Yes, this kit is compatible with the WFE-6 model pump.
Reply
will this work for my WF-28
Reply
Hi, Heather. Yes, this is the correct tune up kit for your model pump.
Reply
Hi Matthew, Yes this is the correct Tune-Up Kit for your Whisperflo Pump included in your photo. Please click here for the B2843 Replacement Motor which is the proper replacement motor for your pump in the photo. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
Thank you for your quick response, can I have the link for the bearing too (front and back) so I added to the cart to make one order.
Reply
Hi Matthew, The front and back bearing for your motor are the same and it is this 6203 Pool Motor Bearing, you will require 2 of these one for the front and one for the back. I hope this helps, if you have any questions please let us know.
Reply
I am replacing a 071314s motor with a B2982 motor. My pump is model WFE-4 and it is a chlorine pool. I would like to replace all of the seals as well. Can you tell me the correct tune up kit?
Reply
Hi David, The Tune Up Kit on this Page GOKIT32 would be the proper seal kit for your WFE-4 Whisperflo Pump.
Reply
I am looking to purchase a goKit for a wisperflo part# on the side is 011513. Does your part # gokit32 work for this?
Reply
Hi Don, Yes this GOKIT32 is the proper kit for the Whisperflo 011513.
Reply
We have a Pentair 7-177475-20 y56y pump and we are replacing the motor with the Century 1.5 HP square flange 56y Up Rate motor - B2854 but we don't know what gasket kit goes with it to replace them when we change out the motor or would you recommend a different motor?
Reply
Jason, The seals are specific to the pump housing, not the motor. If you can provide the model number from the pump housing, we can recommend the correct seals.
Reply
Hi Victoria, This is NOT the correct seal kit for the pump in your photos. You will require this Pentair Super Flo Seal Kit and this 1.5 HP Up Rate Super Flo Replacement Motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
I have a Purex Whisperflow pump 1-1/2 HP connected to a Purex SMBW2060 Filter for my 20,000 gal inground pool. It's over 20 years old and I can hear air leaks when running. I would like to rebuild it. Cannot read the p/n on pump. which rebuild kit should I order?
Reply
Hi Dave, this is the correct tune-up kit for the model Pentair Whisperflo series pool pump.
Reply
The replacement motor for your motor part number 177476 is the B859 that you can view by clicking here. This seal kit is correct for your Pentair Whisperflo saltwater pool and the GOKIT32 that you can view by clicking here is for a standard chlorine pool.
Reply
Is your GOKIT32 the proper one for my Pentair WF-28 (pn 11774) pump? I need to replace the seal. Thanks.
Reply
Hi Jerry, yes this GOKIT32 is the correct seal kit for the Pentair Whisperflo model WF-28. For a saltwater swimming pool, we recommend the GOKIT32SALT as it has a more corrosion-resistant shaft seal.
Reply
Just making sure this is the right kit, thanks in advance!
Hi Jeffery, yes this is the correct seal kit for the Pentair Whisperflo model WFE-28 pool pump. If you have a saltwater swimming pool you can also use the GOKIT32SALT.
Reply
What is the correct replacement motor for a WFDS-28 Motor #177456 2.0/.25 FR Y56Y
Reply
Hi Joe, the direct motor replacement for your motor part number 177456 is catalog number B983, and this is the correct seal kit in a standard chorine swimming pool. For a saltwater pool, it will be the GIKIT32SALT.
Reply
which tune up kit do I need for for B2853 P56Y pump?
Reply
Hello,In order to determine which seals you need, I will need to know the make/model of the pump.
Reply
My century centurian 2.5 HP CAT B2840 TYPE CX with a 56Y FRAME is leaking whats the correct seal replacement kit
Reply
Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
does this seal kit fit p/n 011513
pmp wfe-4
serial no. 0326142160035B
05/21/2016
Reply
Hi Joe, yes this is the correct seal kit for the Pentair Whisperflo pump model WFE-4.
Reply
I have an Intelliflo 011018 pump serial # 0332103120357C Does this seal kit work for my pump?
Reply
Christopher,Yes, you can use GOKIT32 for your Intelliflo Pump.
Reply
Hi Ronald, You will require this GOKIT32 Whisperflo Tune Up Kit
Reply
Is this the correct tune up kit for the whisper flow 355022S motor. I want to make sure before I add it to my order.
Reply
Yes this is the correct tune-up kit for your whisper flow 355022S motor.
Reply
have a purex triton whisper flo ..20years old..correct kit?
Reply
Yes this is the correct TuneUp Kit for the Purex Whisperflo Pump.
Reply
Hello Bill. The bearings for the Century Centurion motor 7-186236-20 are the Century motors Bearing, 203 (2 required): Bearing, 203 (Single) - 62032RS. The Aladin Tune-Up Kit - GOKIT20 contains all the replacement gaskets/o-rings for the Foxxx UltraFlow pool pump. Tune Up Kit American Ultra Flow & Bronze Pump - GOKIT20
Reply
Is this tune up kit good for a WhisperFlo model # WFE-3?
Thank you for contacting Inyo Pools, Tune Up Kit Pentair/Purex Whisperflo - GOKIT32 is the correct tune up kit. If you have saltwater Tune Up Kit Pentair/Purex Whisperflo Saltwater - GOKIT32SALT is the correct tune up kit
Reply
Will ths kit work on a superflow? looking at at a B2854 motor. My pump is a 355024s, 56y. 115/230
Reply
Hello John. The Pentair Whisperflo GOKIT32 is not compatible with the Pentair SuperFlo. The GOKIT78 contains the correct tune-up parts for the Pentair SuperFlo. GOKIT78 Attached please find a Pentair SuperFlo exploded parts diagram for reference. Pentair SuperFlo Pump A GOKIT is specific to the manufacturer/model of the pump, not the motor.
Reply
Is the Go-kit32-9 the same as the Go-kit32, and if not what is the difference?
Reply
Hello Sue, yes the GOKIT32-9 is the same as the GOKIT32. We also carry the GOKIT32SALT which is designed for saltwater swimming pools.
Reply
Is the GOKIT32 the correct one for my Pentair Whisperflo Pump, P/N 011570, PMP WFK - 8 208/230/460V, Serial No. 0327288130007P?
Reply
Hello Richard, yes the GOKIT32 is the correct seal kit for your Pentair Whisperflo pool pump. If you have a saltwater pool then you will want to use the GOKIT32SALT.
Reply
Hello Robert. The Pentair WhisperFlo Pool Pump Seal Kit - Model GOKIT32 is the correct seal kit for the Pentair WhisperFlo model WFDS-4 per the photo attachments. Attached please find the Pentair Whisperflo Pump exploded parts diagram for reference.
Reply
Hello, you would want to purchase the Pentair Pacfab Pinnacle Pump Seal Kit - Model GOKIT24 for your pump's seal kit.
Reply
